The flat glass that means produced by the process is repeated across the different applications and requirements. Float glass introduces by sir Alastair Pilkington in 1952. It accesses the glowing planes of glass to be manufactured than ever before. The ultimate strength of glasses, it related to the rate at which cooled there are four types namely
- Annealed glass
- Tempered or toughened glass
- Heat-strengthened glass
- Laminated glass
Annealed glass – it deals with the part of basic formed from the annealing process stage of the floating storage. The molten glass is considered cool slowly in a controlled way until it reaches for room temperature, it reveals the fact of stresses glass. Without controls of the cool glass. speedie glass would crack with some relatively small variations in temperature. It is one of the most glasses in an advanced society.
Tempered or toughened glass – one of the most common tempered in the glass repair in balustrade or some similar design structure application and requirements. Annealed glass can be heated as 800 degrees Celsius by conduction, radiation, and convection. The cooling glass occupies the matter of uniform and the simultaneous blast of air on both surfaces. There is some difference between the cooling and inside the glass production can make different physical properties and counting the process of the compressive structure in the surface and it can balance the part of tensile stresses in the body of the glass repair. This process occurs four or five times Conditional strength and annealed glass Or untreated glass. It included the increased performance of glass repair to mechanical resistance to breakage and when it does break and causes it to produce the small value and typically square fragments rather than long, dangerous that lead to injury.
Heat-strengthened glass – It based on the semi tempered or semi toughened glass. The heat glasses involve the strengthening glass access the power of annealed glass back up to about 650 to 700 degrees Celsius and then cooling it quickly with the impact of the toughened glass. The heat-strengthened process increases the mechanical and thermal strength of annealed glass. When it breaks the fragments are similar to the size of annealed glass but staying together. This glass is not repeatedly used in structural applications because of its limited structure, although the tempered glass fracturing into thousand of small pieces.
Laminated glass – one of the most famous pieces of laminate glass. It gives many advantages to glass safety and secured are the best known of this laminated glass. It associated with the shattered glass fragments it settled with easy penetration. If a panel breaks or shattered highly laminated panels will break at the same time and keeps edge protection until replaced or secured suitably. A variety of other interlayer can apply a range of other technologies to the application and requirements. Colored glass interlayer can be used for privacy and purely decorative purpose design.
All the type of glass makes on some commonly used in day to day life. Peoples are making us to clever by using this glass handled person.